Irradiated Ch/GG/PVP-based stimuli-responsive hydrogels for controlled drug release

Hydrogels based on gamma (γ) irradiated chitosan (pre-irradiated), guar gum, and polyvinyl pyrrolidone were crosslinked with various concentrations of (3-mercapto propyl)trimethoxysilane and fabricated by solution casting technique for the drug delivery applications. High molecular weight chitosan (Ch) possesses lower solubility and higher viscosity, these problems overcame by γ irradiation, which also generated hydrophilicity and effect of irradiated Ch on controlled drug release was assessed. FTIR analysis showed the development of chemical and physical interactions and confirmed the incorporation of characteristic peaks. SEM micrographs revealed porous structure of the prepared hydrogels. Swelling analysis of the hydrogels was performed in distilled water, buffer, and electrolyte mediums. All the hydrogel samples showed higher swelling at acidic pH and lower swelling at neutral and basic pH. These pH-responsive characteristics made these RCGP hydrogels an important contender for injectable controlled drug release. The ampicillin sodium drug was loaded and in vitro controlled release mechanism was evaluated in the PBS, SIF, and SGF which shown out of all prepared hydrogels (RCGP-1, RCGP-2, and RCGP-3), RCGP-1 has exhibited 87.4% release in PBS and 81.3% in SIF in 180 min.     

The effect of lithium fluoride on the thermal stability and thermoluminescence properties of borosilicate glass and glass-ceramics

The oxyfluoride glass and glass-ceramics from the LiF-B₂O₃-SiO₂ system are developed. The stable glass can be produced in the range of 20–40 mol% LiF. The effect of LiF admixture on the thermal stability of the glass as well as the thermoluminescence (TL) properties such as glow curves shape is studied. The results show that the increase of lithium fluoride content in the borosilicate glass causes efficiency enhancement of the thermoluminescence signal. We have clearly stated that the process of controlled crystallization of the oxyfluoride glasses can lead again to increased intensity of the TL process. The glass-ceramics with 40 mol% LiF reveals similar level of TL signal to commercially used doped LiF material and can be considered as active material for alpha and beta radiation detectors.     

测井曲线标准化方法研究

由于长岭凹陷区经过近60年的勘探开发,再加上井场井眼条件的差异、测井系列、仪器刻度、测量时间及操作者不同等因素,使得各测井曲线存在系统误差。因此在开展储层参数研究和有效厚度划分时,为消除这些非地层因素对原始资料的影响,有必要对测井曲线进行标准化,以保证解释结果的合理性与可靠性。测井曲线标准化方法可以分为定性和定量两种类型。其中定性方法主要包括直方图法标准化校正、均值法标准化校正和重叠图法标准化校正;定量方法则为趋势面分析校正法。本论文利用Matlab软件,采用趋势面方法对研究区域内的井进行测井曲线标准化。结果表明经过趋势面法标准化校正能够消除不利因素,准确的提取出测井曲线中的各种有用地质信息。     

X射线干涉光刻光束线关键光学元件热-结构耦合分析

为了保证上海光源X射线干涉光刻光束线的稳定性,减小热变形对实验结果的影响,对X射线干涉光刻光束线的3个关键光学元件——偏转镜、聚焦镜和精密四刀狭缝进行热-结构耦合分析。首先,计算偏转镜、聚焦镜和精密四刀狭缝所承载的功率密度;然后,建立其有限元模型;最后,获得光学元件的温度场和热变形的结果。结果表明,偏转镜和聚焦镜采用间接水冷方式可有效抑制热变形,冷却后的最大面形误差分别为7.2μrad和9.2μrad。精密四刀狭缝未冷却时,刀片组件温度介于271.56~273.27℃,刀口热变形为0.19 mm,直线导轨热变形为0.08 mm;经过铜辫子冷却后,刀片组件温度降至22.24~23.94℃,刀口热变形降至0.2μm,直线导轨热变形降至0.1μm;采用影像法和接触探头法测试后,刀口直线度、平行度和重复精度均满足技术要求。偏转镜、聚焦镜和精密四刀狭缝的热变形通过间接水冷和铜辫子的冷却方式可以得到很大程度的抑制,进而保证光斑质量。     

γ射线辐照和阳光照射对ZF6铅玻璃透光率的影响

通过实验研究ZF6铅玻璃在~(60)Co放射源相同剂量率不同累积剂量照射下透光率的变化规律。将辐照后的铅玻璃在室外阳光下、室内自然光下和不透光的抽屉中放置观察,发现阳光照射对铅玻璃辐照着色的恢复起着重要作用,在建立铅玻璃透光率随辐照时间变化的数学模型时,室内自然光对铅玻璃透光率的影响可忽略。实验数据验证了受辐照时铅玻璃透光率的变化与辐照时间符合指数函数关系。根据文献资料推导出铅玻璃透光率变化与光照时间为线性函数关系,但发现其与实验数据的符合程度较差,本文根据样条曲线插值法推导出铅玻璃透光率与光照时间为二次函数关系,与实验数据的符合效果较好。     

The analysis and comparison of two novel kinds of focusing elements as reflectors

In this article, two novel kinds of focusing elements as reflectors are analyzed and compared. One is the grooved Fresnel zone plate reflector with continuous phase‐correcting. The other called subzone paraboloid reflector, has the profile that consists of a series of paraboloids. Their diffraction efficiencies and bandwidths are described. The two elements still preserve the advantages of Fresnel zone plates, namely, low profile, high efficiency, and simple fabrication. Two dual‐reflector antennas using the proposed focusing elements as the main reflectors are simulated and the results show that these antennas have good radiation performances. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:101–108, 2015.     

电子调速器控制器的电磁兼容分析与试验验证

基于辐射发射的形成机理,以某型号电子调速器控制器为目标,利用EMSCAN电磁干扰扫描系统对控制器进行近场辐射测试,总结出一套切实可行的辐射发射分析与试验验证方法.在此基础上,对该型号电子调速器控制器进行了整改设计,并进行了试验验证.结果 表明:基于EM-SCAN系统的分析及整改方法效果明显,缩短了电子产品电磁兼容问题的整改设计周期,并节约了测试成本.     

一种新的风电场复杂下垫面场地校准模型

针对现有方法模型简单、气象因素考虑不足和缺少异常数据检测等问题,提出一种基于相对密度离群因子（relative RDOF）异常检测和支持向量回归（SVR）组合的场地校准模型。首先,通过RDOF与四分位法对测风塔与风电机组距下垫面相同高度风速间的风速比进行异常数据检测,间接实现风速预处理;同时,根据测风塔与风电机组相同高度风切变序列的相关性,动态引入大气稳定度等级,与多种常规自然因素共同作为模型输入。然后,建立SVR场地校准模型修正风速。最后,通过算例验证,并与国际电工委员会（IEC）标准方法进行对比。结果表明,该方法可有效提升场地校准模型的风速修正精度。     

Induction of adaptive response <i>in utero </i>by ionizing radiation: A radiation quality dependent phenomenon

Investigation on possible induction of adaptive response (AR) by high-liner energy transfer (LET) particle radiation for protection against low-LET photon radiation-induced detrimental effects has not yet been performed in utero. This study verified if an AR could be induced by high-LET particle radiation from accelerated heavy ions against low-LET X-ray radiation-induced detrimental effects on fetal mice. Total body irradiation of pregnant C57BL/6J mice were performed by delivering a priming dose ranging from 10 mGy to 320 mGy of particle radiation on gestation day 11 followed one day later by a challenge dose at 3500 mGy from X-ray radiation. The monoenergetic beams of carbon, silicon and iron with the LET values of about 15, 55, and 200 KeV/μm, respectively, were examined. Significant suppression by the priming radiation of the detrimental effects (fetal death, malformation, or low body weight) was used as the endpoints for judgment of a successful AR induction on gestation day 18. Existence of AR was not observed. On the other hand, the priming dose of high-LET particle radiation, in some cases, even increased the detrimental effects induced by the challenge dose from low-LET X-ray radiation. Although existence of AR induced by high-LET radiation in cultured mammalian cells in vitro and in certain tissues of laboratory mice in vivo was demonstrated, the present study did not suggest that low dose of high-LET particle radiation could induce an AR in fetal mice in utero under the setup of our experimental system.     

Investigation of flame characteristics using various design parameters in a pulverized coal burner for oxy‐fuel retrofitting

In oxy‐coal combustion for carbon capture and storage, oxygen and recirculated CO₂ are used as oxidizers instead of air to produce CO₂‐rich flue gas. Owing to differences between the physical and chemical properties of CO₂ and N₂, the development of a burner and boiler system based on fundamental understanding of the flame type, heat transfer, and NOx emission is required. In this study, computational fluid dynamic analysis incorporating comprehensive coal conversion models was performed to investigate the combustion characteristics of a 30 MWth tangential vane swirl pulverized coal burner. Various burner design parameters were evaluated, including the influence of the burner geometry on the swirl strength, direct O₂ injection, and O₂ concentrations in the primary and secondary oxidizers. The flame characteristics were sensitive to the oxygen concentration in the primary oxidizer. The performance of direct O₂ injection around the primary oxidizer with low O₂ concentration was dependent on the mixing of the fuel and oxidizer. The predictions showed that swirl number adjustment and careful direct oxygen injection design are essential for retrofitting air‐firing pulverized coal burners as oxy‐firing burners.